ScanSnap Roller Replacement Silicone Tube Repair for s1500/s1500m

Set of 4, use with tube cutter

These are silicone tubes for replacing the feed rollers and ejection rollers of ScanSnap S1500/S1500M.
Not genuine product.
Silicone tube: Inner diameter 6mm, Outer diameter 12mm, Length approx. 24mm (with some variation).

Use with tube cutter.

These are for replacing the deteriorated rubber rollers of ScanSnap. There are two methods: complete disassembly or partial replacement by making a vertical cut. These can be used as is for complete disassembly, or by making a cut for partial replacement.

Method for complete disassembly replacement:
The process is too lengthy to describe here, so please search online. There is no difference in normal use, and although it takes time, the appearance will be perfect.

Method for partial replacement:
1. Remove the feed rollers and ejection rollers by making a vertical cut with a cutter and pulling them off. If hydrolysis has progressed significantly, you may need to remove stickiness with anhydrous ethanol and cotton swabs.
2. Make a vertical cut in the new tube and set it onto the feed roller and ejection roller shafts, utilizing the rotation of the power button.
Some people use adhesive, but it is not necessary. Only those who wish to use adhesive should apply it.

This is sold as surplus from personal purchase, so the quality differs from products sold by companies. If you are concerned about burrs, please purchase those instead.
If the quantity is insufficient, a refund will be processed.